The Luxury of Being Yourself

Royal Saunas

Troubleshooting Guide

  Problems Explanations Solutions
1 Power indicator light on

Power cord is not plug-in

 
  1. Check for power to the outlet.
  2. Check connection between power cord and main control unit.
The fuse is burned out Check or replace the fuse.

2

 

 Function indicator light not on The corresponding indicator light is
broken or burned out.		 Repair or replace the control
panel.
The wiring or some electronic component in the circuit has failed Repair or replace what has failed in that circuit.
3 Infrared Heater will not heat up The heater is broken Replace with a new heater of the
same specifications.
Its life will be shortened gradually from excessive use
The fuse is burned out. Check or replace the fuse.
The wiring connection for the heater is loose or in the wrong location. Check it, and reconnect tightly.
The circuit board is not functioning. Check power output on the circuit board
4 Sauna room not maintaining correct temperature Problem with heater. See Item #3.
Incorrect setting on control panel Reset it.
The temperature sensor wire may be loose or broken. Check sensor wire connection and condition.
Check to see if sensor head is visible inside the sauna room.
5 Peculiar burning smell Circuit problems (broken component, short circuit, failure of controlling system) causing the burning of some component in the electrical system. 1. Unplug sauna, check the voltage.
2. Find the objects with problems.
3. Replace the parts.
6 The light not working The light bulb is burned out. Replace light bulb.
The bulb is not secured in the base
  1. Make sure the bulb is tight enough to make good contact in the light fixture.
  2. Check the lighting protection fuse.
The socket is broken. Replace it.
Problems with electrical control panel. Check or replace the panel.
7 No sound or poor sound from speakers The speaker is broken or speaker is loose
  1. Check speaker wire.
  2. Check speaker
The wire connection is loose. Check connectors to be sure they make good contact.
CD-player is not turned on. Turn on the CD-player.
CD-player is not functioning
  1. Check faceplate contact on the CD-player.
  2. Check fuse in the fuse holder.